4 x Inlet Control Multibloc Valve Group 22mm 3/6 Bar Alternative (Four Pack)

Details

4 x inlet Control Multibloc Valve Groups – Alternative to Reliance CWIC200001 CASH ACME Inlet Control Valve 22mm 3/6 Bar

This pack comprises: 4 x Inlet Control Multibloc Valve Group 22mm 3/6 Bar

This one piece inlet control incorporates several different control devices in one. It is specifically designed for use on an unvented system to control the incoming water supply to a hot water cylinder. It includes: a ‘droptight’ pressure reducing valve, meaning the valve will hold at the pre-set pressure regardless of whether under flow or no flow conditions and regardless of fluctuating inlet pressures.

It also incorporates a single check valve which will protect the system against backflow prevention up to fluid category 2, and a pre-set expansion relief valve which will prevent over-pressurisation. The expansion relief valve is designed so it can rotate, to allow the discharge connection to be fitted in various directions making installation easier.

A connection for a balanced cold water take off allows the user to connect a cold water feed direct from the inlet control valve.

Features and Benefits

• Integral strainer
• Superior flow rates
• ‘Droptight’ pressure reducing cartridge
• Prevents over-pressurisation
• Single check valve
• Dedicated expansion vessel connection on some models
• Rotating expansion relief valve
• WRAS Approved

Specifications
Maximum working pressure: 16.0 bar
Maximum temperature: 45°C
Pressure reduction ratio: 10:1
Max Connection size: 22mm