Gledhill StainlessLite Plus 180 Litre Indirect Unvented Cylinder – PLUIN180

SKU: GH-D-303
Availability: In stock

Free shipping

£598.87 EXCL. TAX

£718.64 INCL. TAX


Customer Notice: These cylinders are sent direct from the manufacturer - please call us on 01691 888595 to confirm lead times

In stock

Qty:
    Share
Overview

Details

*Delivery to Mainland UK Only – Delivery in 2-5 working days *
Please Note Returns On This Item Will Incur A 25% Re-Stocking Fee And Must Be Returned At Your Cost via A Pallet Service With Insurance

Available in 8 sizes ranging from 90 litres to 400 litres, with the largest model capable of satisfying the hot water demands of a property with 3 bathrooms and 3 separate shower rooms.

The indirect range has a high efficiency corrugated tube coil which is connected to a conventional boiler to heat the cylinder of water. The coil’s corrugated design gives much faster recovery times than can be achieved with plain tube coils.

All models have a temperature and pressure relief valve which is factory set at 6 bar and 95 degrees celsius.

(Please note all indirect models come with an on-peak back-up immersion but only the 250, 300 and 400 litre models are supplied with an additional off-peak immersion.)

Features and Benefits

  1. Designed for use with gas or oil boilers, either sealed system or open vented
  2. High efficiency corrugated coil maximises heat transfer to the cylinder of water
  3. Corrugated coil provides faster reheat times compared to plain coil
  4. 3kW incoloy immersion heater for emergency back-up
  5. 90° elbow supplied as standard
  6. Standard and slimline models available
  7. Comes with a 25 year warranty
  8. Lightest cylinder on the market.

Components With Product

  • Combination inlet group incorporating pressure reducing valve, strainer, check valve, balance cold take off point, expansion relief valve and expansion vessel connection points
  • Potable expansion vessels c/w integral wall bracket
  • Tundish
  • Drain valve
  • Compression fittings
  • Dual control thermostat and combined overheat thermostat
  • Two port (22mm) zone valve for primary circuit
  • Technical/user product literature.

Specification

  • ErP rating: B
  • Heat loss: 55 watts
  • Capacity: 178 litres
  • Height: 1306 mm
  • Diameter: 550 mm
  • Weight (empty): 30 kg
  • Weight (full): 208 kg
  • Heat up time: 30 minutes
  • Number of immersions: 1
  • Secondary return: No

Installation & Servicing Instructions:

StainLess Lite Plus Manual

Additional information

Weight30 kg
Brand

Manufacturers Code

PLUIN180

EAN

655390522306

SKUGH-D-303