Titan – TigerLoop Oil De-aerator 1/4″

SKU: 9801052
Availability: In stock

Free shipping

£69.57 EXCL. TAX

£83.49 INCL. TAX

In stock

Qty:
    Share
Overview

Titan – TigerLoop Oil De-aerator 1/4″

  • 1/4″ BSP
  • 0.6 litre/hour de-aeration capacity

Details

Titan – TigerLoop Oil De-aerator 1/4″

Reduce oil heating installation costs with the revolutionary Tigerloop. The de-aeration process separates air from the heating oil, eliminating the need for a return pipe to the tank.

All systems benefit from Tigerloop’s unique ability to condition the oil prior to burning. Whether it’s air elimination, nozzle coking problems, vacuum reduction, oil preheating, or just the elimination of that potentially leaky return line. Suction lifts up to 4.5m can be obtained when using the new Tigerloop system. As this unit vent’s vapour to atmosphere it is required for external installation.

A Tigerloop makes a one-pipe system possible for all types of oil heating installations helping to ensure environmental safety, cost effectiveness and reliability.

Effective de-aeration
In an oil heating system using a Tigerloop, all oil passes through the automatic oil de-aerator, which effectively removes all gas/air bubbles from the system. This eliminates oil pump and nozzle problems associated with gas/air in the oil.

On two-pipe circulation
An oil pump delivers the same amount of oil irrespective of what is actually needed for combustion. In the case of a normal domestic burner, only 5 % of the delivered oil is actually burned in combustion. The remaining 95% is transported by a two-pipe system back to the oil tank. With a Tigerloop automatic oil de-aerator no oil needs to be transported back to the tank. The oil that is not burned in combustion is lead back to the Tigerloop where it is de-aerated again and again automatically. For this reason only the amount of oil to be burned in combustion is sucked from the oil tank.

Preheated oil
A one-pipe system with Tigerloop increases the oil pump capacity. Moreover, the oil is actually preheated to at least room temperature as friction in the oil pump generates heat. This eliminates problems with cold oil giving cleaner combustion and reduced oil consumption.

Minimum of dirt/sludge
The oil flow in a one-pipe system is minimal due to the fact that only the amount of oil burned needs to be drawn up from the tank. For this reason very little dirt/sludge is transported from the oil tank. This reduces the risk for clogged oil filters and burner nozzles. Filtration is more effective, soot build up is reduced and filter life is extended.

Performance
Max Nozzle Capacity110 l/h
Max Return Oil Pumped In To The Tigerloop120 l/h
Max Flow230 l/h
Max De-Aerating Capacity8 l/h
Max Operating Temperature60 Celcius
Max / Min Operating Pressure In The Feed Line+0.5 to -0.6 Bar

Additional information

Weight1 kg
Manufacturers Code

TON110I

condition

EAN

729440151768

EAN

729440151768

SKU9801052