Reliance SRED10000 Electrolytic Scale Reducer6Reliance SRED10000 Electrolytic Scale Reducer2Reliance SRED10000 Electrolytic Scale Reducer33Reliance SRED10000 Electrolytic Scale ReducerReliance SRED10000 Electrolytic Scale ReducerReliance SRED10000 Electrolytic Scale Reducer6
Reliance SRED10000 Electrolytic Scale Reducer
Reliance SRED10000 Electrolytic Scale Reducer6
Reliance SRED10000 Electrolytic Scale Reducer2
Reliance SRED10000 Electrolytic Scale Reducer33
Reliance SRED10000 Electrolytic Scale Reducer
Reliance SRED10000 Electrolytic Scale Reducer
Reliance SRED10000 Electrolytic Scale Reducer6

Reliance 15mm Electrolytic Scale Reducer

SKU: 990531
Availability: In stock

Free shipping

£13.53 EXCL. TAX

£16.23 INCL. TAX

184 in stock

Qty:
    Share
Overview

Electrolytic scale reducer. In-Line scale reducer to prevent the build-up of scale using electrolytic principles.

WRAS Approved Product
10 Bar at 20 Deg C Maximum Working Pressure
Made in the UK
Up to 10 Years Service Life
Saves Energy Costs
No Chemical or Power Needed
Easily Installed with no Moving Parts or Maintenance Required.

Details

Electrolytic scale reducer. In-Line scale reducer to prevent the build-up of scale using electrolytic principles.

– WRAS Approved Product

– Maximum Working Pressure – 10 Bar at 20 Deg C

– Made in Great Britain

– Service Life – Up to 10 Years

– Saves Energy Costs

– No Chemical or Power Needed

– Easily Installed

– No Moving Parts

– No Maintenance Required

WHY FIT AN ELECTROLYTIC SCALE REDUCER?

Part L of the building regulations states that where the mains total water hardness exeeds 200ppm, Provision should be made to treat feed water to water heaters and hot water circuits of combination boilers to reduce the rate of accumulation of limescale and to limit its harmful effect on energy efficiency. Electronic scale reducers are listed in the domestic building services compliance guide as a suitable control. As water flows throgh the unit it emits charged zinc ions which induce hardness salts to cluster together and pass through heating appliances rather than forming limescale deposits on the heat exchanger or water heating element. asaervice life is dependent upon local water conditions and water usage. When the beneficial effect subsides it is time to replace the unit.

POSITIONING

For whole house protection. Ensure that the unit is installed as to be readily accessible for examination, Test, Maintenance or replacement. The unit may be fitted horizontally or vertically. It is not directional. Choose a pipe run long enough to accomadate the unit. An approved single check valve or other no less effective back-flow prevention device shall be fitted at the point of connection between the supply and the unit.

CONNECTION

To ensure a leak proof installation, Make sue the pipe is cut square with a pipe-cutter even if the pipe run is initially broken into using a hacksaw. Upon compression of the 15mm connection tighten fittings with a 24mm spanner or if using SharkBite connections ensure the pipework is fully inserted into the fitting to form a water tight seal.

This item does not require earth bonding continuity.

Note: Water utilities cannot be held responsible for the quality of water passed through this unit.

 

Additional information

Weight 1 kg
Manufacturers Code

SRED100000

Brand

condition

EAN

5056084900021

SKU 990531