Gledhill StainlessLite Plus 400 Litre Indirect Unvented Cylinder – PLUIN400

SKU: GH-D-307
Availability: In stock

Free shipping

£774.86 EXCL. TAX

£929.83 INCL. TAX


These cylinders are sent direct from the manufacturer, normally within 14 to 21 working days. If the lead time is going to be significantly longer, we will contact you.

Delivery charges now apply - these will be added at checkout.

In stock

3/4" Expansion Vessel Hose

Qty:
    Share
Overview

Details

*Delivery to Mainland UK Only – Delivery in 14-21 working days *
Please Note Returns On This Item Will Incur A 25% Re-Stocking Fee And Must Be Returned At Your Cost via A Pallet Service With Insurance

Available in 8 sizes ranging from 90 litres to 400 litres, with the largest model capable of satisfying the hot water demands of a property with 3 bathrooms and 3 separate shower rooms.

The indirect range has a high efficiency corrugated tube coil which is connected to a conventional boiler to heat the cylinder of water. The coil’s corrugated design gives much faster recovery times than can be achieved with plain tube coils.

All models have a temperature and pressure relief valve which is factory set at 6 bar and 95 degrees celsius.

(Please note all indirect models come with an on-peak back-up immersion but only the 250, 300 and 400 litre models are supplied with an additional off-peak immersion.)

Features and Benefits

  1. Designed for use with gas or oil boilers, either sealed system or open vented
  2. High efficiency corrugated coil maximises heat transfer to the cylinder of water
  3. Corrugated coil provides faster reheat times compared to plain coil
  4. 3kW incoloy immersion heater for emergency back-up
  5. 90° elbow supplied as standard
  6. Standard and slimline models available
  7. Comes with a 25 year warranty
  8. Lightest cylinder on the market.

Components With Product

  • Combination inlet group incorporating pressure reducing valve, strainer, check valve, balance cold take off point, expansion relief valve and expansion vessel connection points
  • Potable expansion vessels c/w integral wall bracket
  • Tundish
  • Drain valve
  • Compression fittings
  • Dual control thermostat and combined overheat thermostat
  • Two port (22mm) zone valve for primary circuit
  • Technical/user product literature.

Specification

  • ErP rating: C
  • Heat loss: 87 watts
  • Capacity: 393 litres
  • Height: 2030 mm
  • Diameter: 630 mm
  • Weight (empty): 55 kg
  • Weight (full): 455 kg
  • Heat up time: 41 minutes
  • Number of immersions: 2
  • Secondary return: Yes

Installation & Servicing Instructions:

StainLess Lite Plus Manual

Additional information

Weight55 kg
Brand

Manufacturers Code

PLUIN400

EAN

655390522344

SKUGH-D-307