The Aladdin EasyFit Isolator enables an isolation valve to be inserted quickly and safely in a pipe that can have cold or hot water flowing through it under high pressure.
It provides an effective and robust product for all plumbers, maintenance engineers, water companies, housing associations and the DIY market.
Use the EasyFit Isolator as an emergency shut-off for a leaking pipe or when the mains stopcock is seized or inaccessible. Also when you need to isolate a mains water feed to a multi-occupancy building or to maintain a component in a heating system.
The EasyFit Isolator saves time cooling, draining down, refilling and returning to de-aerate. The bigger the system, the bigger the saving. No more freezing kits and the risk that an ice plug will fail.
The EasyFit Isolator is an essential product for all plumbers.
The isolator valve clamps around and installs into 15mm copper or plastic live pressurised pipe (hot or cold) in less than 3 minutes, providing a large bore, permanent stopcock in the system. ‘WRAS Approved Stopcock’.
- When the mains stopcock is seized or inaccessible Save calling out the water board
– improve your ‘first fix’ rate
- When you need to maintain a component in a heating system
Save time cooling, draining down, refilling and returning to de-aerate – the bigger the system, the bigger the saving
- As an emergency shut-off for a leaking pipe
Even when you can’t freeze you can still EasyFit to pipes with moving water, without the need to turn off the main external / internal service valve.
- Isolating a mains water feed in a multi-occupancy building.
Save notifying and inconveniencing neighbours
Fits 15mm and 1/2” (Copper, PEX, Polybutylene and Multilayer) pipe.
Operating pressure 16bar at 85°C, WRAS Approved, 10 year guarantee,
Body stainless steel, Must be installed using an Aladdin Tool Kit.